How To Repair Powder Coated Finish

Can y'all repair powder coating?

Powder coating uses a mixture of resins and pigments to create a protective glaze to surfaces. In one case practical, it provides a high level of immovability and resilience, just over fourth dimension, even high quality coatings can suffer from harm and wear and tear.

When this happens, can you repair powder coating without having to completely re-apply it?

The proficient news is that you can repair and touch on upwards pulverization coating, providing the surface damage is non too dandy.

What are the Reasons to Repair Pulverization Coating?

Powder coating gives a unified finish to a surface, but this visual entreatment and impact can lessen if the blanket starts to look worn or damaged.

Even if the reason for the coating is purely functional, wear and tear tin can reduce the effectiveness of its performance, such as providing resistance to corrosion and offering weather protection.

Ideally, if there are defects that you notice before curing the pulverization, so this is the best fourth dimension to rectify them. At this stage, before the powder is oven-baked, this is straightforward to practice. You can easily accident off whatsoever powder that has non adhered correctly and reapply powder to the affected part.

However, there may be a need to repair or touch up powder coatings afterward the curing process.

Repairing and Touching Upwardly Powder Coating

I fashion to repair pulverisation blanket is to advisedly apply a small amount of liquid paint.

Providing you take the right colour-matched liquid enamel, this tin can work where there are small-scale, and non too conspicuous, areas of damage or wear.

Powder coating is different from liquid paint, simply it is notwithstanding paint. Therefore, providing you apply it properly, you lot tin can use liquid paint to repair information technology.

Where pulverization coating has faded, this usually means the surface has oxidised. When this has occurred, it is ofttimes only ii to iii microns deep, so you can clean the area to betrayal the original colour and then retouch.

Similarly, light scratches and blemishes to pulverisation coating volition tend to be shallow, enabling conscientious repair using a carefully colour-matched liquid paint.

Before touching up powder coated surfaces, you lot must first clean them. Clean the surface by washing using a detergent.
If you apply a solvent to remove whatever marks, you must first check that they are non too aggressive, otherwise they might cook the pigment. Always test on a small, less visible area first.
When choosing your paint for repairing or touching upward pulverisation coating, besides make certain it does not include an aggressive solvent.
Remove whatsoever surface contaminants with a fine rubbing down paper, and remove whatever loose flakes.
Employ a paint primer to the expanse y'all are repairing if the metalwork is exposed. The simplest way of doing this is past using an aerosol.
The aforementioned applies to the liquid pigment topcoat. Aerosol should requite you an even terminate. Apply three very lite coats, allowing each to dry. Where necessary, rub the paint downwards.

For large areas of damage nosotros recommend that repairs are carried out by a Professional company who tin can offering method statements and Guarantees for their piece of work.

For more information about powder coating, please contact us.

Dorsum to Case Studies Listing

Project Details

Can you repair powder coating?